Location Profile Maintenance

Owned by JASCI Software
Last updated: Oct 04, 2024
3 min read

Select Location Profile Maintenance

  • Location Profile Maintenance can usually be found under Setup → Location → Location Profile Maintenance.

  • From here you can search for and edit existing location profiles with several criteria options, including ID, area, group and description.

image-20240325-210951.png

  • You can also create a new profile, or display all existing location profiles.

image-20240325-211012.png

Setting Up a Location

  • From the lookup screen, you can edit existing profiles, or create new ones with the green ‘Add New’ button.

  • Once on the maintenance screen, there are several required and optional fields to populate, including:

    • Fulfillment Center - Specify which fulfillment center the locations belong to (if there are multiple FCs)

    • Number of Locations - How many locations will be associated with this profile.

    • Profile Group - Specify which group this location profile falls under.

    • Location Profile - System ID of the location profile to be used in other flows, such as location maintenance.

    • Location Type - Choose the location type, which determines how inventory can be picked - default types are Case (cases can be picked from a pallet), Pallet (entire pallet must be picked - no partial picking), Prime (partial picking allowed) and Virtual (no physical location associated - usually temporary paw/pak/shp location).

    • Location Width/Depth/Weight/Height Capacities - Specify dimensions for these locations. (Used in slotting logic)

    • Allocation Allowable - Locations are available for picking or not.

    • Free Location when Zero - Once inventory in the location reaches zero, the locations will be freed to be used again for slotting.

    • Free Prime Location - How many days until a location becomes available again.

    • Multiple Products in Same Location - Allow different products to be stored in the single location, and specify how many different products are allowed.

    • Slotting - Allows for system directed or manual slotting.

    • Location Check - Enable location checks for these locations

    • Slot Product Categories - Here you can select an option from previously setup categories and assign a location profile to a certain product category.

If you have any questions or concerns, please submit a ticket with JASCI Support. Please refer to the Ticketing Instructions page for further instructions.